xorg.conf

[HowTo] Generowanie pliku xorg.conf

Karty z Nvidią, możesz wygenerować automatycznie xorg.conf po zainstalowaniu sterownika komendą:

sudo nvidia-xconfig

Co prawda w coraz mniejszym stopniu system wykorzystuje ustawienia użytkownika ale zawsze można spróbować ustawić własną rozdzielczość w xorgu.

Przykładowy xorg.conf dla Nvidi 5200 z monitorem lampowym wygenerowany automatycznie

# nvidia-settings: X configuration file generated by nvidia-settings

# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010

# nvidia-xconfig: X configuration file generated by nvidia-xconfig

# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22 11:44:23 PDT 2010

Section “ServerLayout”

Identifier “Layout0″

Screen 0 ”Screen0″ 0 0

InputDevice ”Keyboard0″ “CoreKeyboard”

InputDevice ”Mouse0″ “CorePointer”

Option “Xinerama” “0″

EndSection

Section “Module”

Load “glx”

EndSection

Section “InputDevice”

Identifier “Mouse0″

Driver “mouse”

Option “Protocol” “auto”

Option “Device” “/dev/psaux”

Option “Emulate3Buttons” “no”

Option “ZAxisMapping” “4 5″

EndSection

Section “InputDevice”

# generated from default

Identifier “Keyboard0″

Driver “kbd”

EndSection

Section “Monitor”

Identifier “Monitor0″

VendorName “Unknown”

ModelName ”Siemens MCM 17P1″

HorizSync 30.0 – 96.0

VertRefresh 50.0 – 160.0

Option “DPMS”

EndSection

Section “Device”

Identifier “Device0″

Driver “nvidia”

VendorName “NVIDIA Corporation”

BoardName ”GeForce FX 5200″

Option “NoLogo” “True”

EndSection

Section “Screen”

Identifier “Screen0″

Device “Device0″

Monitor ”Monitor0″

DefaultDepth 24

Option “AddARGBGLXVisuals” “True”

Option “TwinView” “0″

Option “TwinViewXineramaInfoOrder” “CRT-0″

Option “metamodes” “1152x864_100 +0+0; 1152×864 +0+0″

SubSection “Display”

Depth 24

EndSubSection

EndSection

a tu ta sama karta z monitorem LCD

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010

Section “ServerLayout”
Identifier     “Layout0″
Screen      0 “Screen0″ 0 0
InputDevice    “Keyboard0″ “CoreKeyboard”
InputDevice    “Mouse0″ “CorePointer”
Option         “Xinerama” “0″
EndSection

Section “Files”
EndSection

Section “InputDevice”

# generated from default
Identifier     “Mouse0″
Driver         “mouse”
Option         “Protocol” “auto”
Option         “Device” “/dev/psaux”
Option         “Emulate3Buttons” “no”
Option         “ZAxisMapping” “4 5″
EndSection

Section “InputDevice”

# generated from default
Identifier     “Keyboard0″
Driver         “kbd”
EndSection

Section “Monitor”

# HorizSync source: edid, VertRefresh source: edid
Identifier     “Monitor0″
VendorName     “Unknown”
ModelName      “RTK 17” LCDMonitor”
HorizSync       20.0 – 92.0
VertRefresh     43.0 – 85.0
Option         “DPMS”
EndSection

Section “Device”
Identifier     “Device0″
Driver         “nvidia”
VendorName     “NVIDIA Corporation”
BoardName      “GeForce FX 5200″
EndSection

Section “Screen”

# Removed Option “metamodes” “1280x1024_60 +0+0″
# Removed Option “metamodes” “1280×1024 +0+0; 1280x1024_60 +0+0″
# Removed Option “metamodes” “1280x1024_60 +0+0; 1280×1024 +0+0″
# Removed Option “metamodes” “1400x1050_60 +0+0; 1280x1024_60 +0+0; 1280×1024 +0+0″
Identifier     “Screen0″
Device         “Device0″
Monitor        “Monitor0″
DefaultDepth    24
Option         “TwinView” “0″
Option         “TwinViewXineramaInfoOrder” “CRT-0″
Option         “metamodes” “1280x1024_60 +0+0; 1280×1024 +0+0″
SubSection     “Display”
Depth       24
EndSubSection
EndSection